Icom IC-FR6300

Spesifikasi Icom IC-FR6300

GENERAL
Frequency coverage 330-400 MHz
Number of channels 32 channels / 1 zone
Channel spacing 6.25/12.5/25 or 7.5/15/30 kHz
(Varies according to version)
Type of emission 16K0F3E*1 (25 kHz),
14K0F3E (20 kHz, EUR),
11K0F3E (12.5/15 kHz, USA),
8K50F3E (12.5 kHz),
4K00F1E/F1D (6.25/7.5 kHz)
Power supply requirement 13.6 V DC (USA, CAN, EXP)
13.2 V DC (EUR, AUS)
Current drain Tx High 15.0 A maximum (at 50 W)
(at 13.6V DC) 8.0 A maximum (at 25 W)
Rx Stand-by 500 mA (FAN OFF)
Rx Max. audio 1900 mA
Dimensions IC-FR5300/IC-FR6300 483 × 88 × 260 mm, 19.0 × 3.5 × 10.2 in
(projections not included; W×H×D) UR-FR5300/UR-FR6300 176×60×194 mm, 6.9 × 2.4 × 7.6 in
Weight (approx.) IC-FR5300/IC-FR6300 5.78 kg, 12.7 lb
UR-FR5300/UR-FR6300 2.1 kg, 4.6 lb
Operating temperature range -30℃ to +60℃, –22 °F to +140 °F (USA, CAN, EXP)
-25 ℃ to +55 ℃, –13 °F to +131 °F (EUR, AUS)
*1 25 kHz bandwidth is not available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25 kHz bandwidth.
TRANSMITTER
RF output power (Hi, L2, L1) 50 W, 25 W, 5 W (USA, EXP, CAN, AUS Versions)
(Varies according to version) 25 W, 10 W, 5.8 W (EUR, EXP Versions)
Spurious emissions 80 dB typ. (TIA-603)
0.25 μW (≤ 1 GHz), 1.00 μW (> 1 GHz) (EN301 166, EN300 086)
Frequency stability ±1.0 ppm or less
±0.1 ppm or less (corrected using GNSS)
Audio harmonic distortion 0.8% typ. (AF 1kHz 40% deviation)(TIA-603)
0.8% typ. (AF 1kHz 40% deviation)(EN 300 086)
FM Hum and Noise 72 dB typ. (W)
67 dB typ. (N)
RECEIVER
Sensitivity Digital (1% BER) –3.5 dBμV (0.33 μV) emf typ. (EN301 166)
Analog (12 dB SINAD) –117 dBm (0.32 μV) typ. (TIA-603)
Analog (20 dB SINAD) –3.0/–3.0/0.0 dBμV emf typ. (W/M/N)(EN300 086)
Adjacent channel Digital 63 dB typ. (EN301 166)
selectivity Analog 80/56 dB typ. (W/N)(TIA-603)
78/78/74 dB typ. (W/M/N)(EN300 086)
Spurious response Digital 85 dBμV emf typ. (EN301 166)
rejection Analog 84 dB typ.(TIA-603)
81 dB typ. (EN300 086)
Intermodulation Digital 78 dBμV emf typ. (EN301 166)
rejection Analog 80/80 dB typ. (W/N)(TIA-603)
74/74/73 dB typ. (W/M/N)(EN300 086)
AF output power 3.9 W typ. (at 5% distortion with a 4Ω load)
Measurements made in accordance with TIA-603, EN300 086 and EN301 166.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 G
Method, Proc.
Low Pressure Storage 500.5 I
Low Pressure Operation 500.5 II
High Temperature Storage 501.5 I
High Temperature Operation 501.5 II
Low Temperature Storage 502.5 I
Low Temperature Operation 502.5 II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Humidity 507.5 II
Dust Blowing 510.5 I
Vibration 514.6 I
Shock Functional 516.6 I

All stated specifications are subject to change without notice or obligation.

Categories: , Tag: