Specifications:
General
IC-F8101 |
||
|---|---|---|
| Frequency coverage | Receive | 0.5–29.9999MHz |
| Transmit | 1.6–29.9999MHz | |
| Number of channels | 500 channels | |
| Type of emissions | Australia version | J3E, A3E (RX only) |
| Export/USA versions | J3E, A3E, A1A, F1B, J2B | |
| Power supply requirements | 13.8V DC Negative ground 10.8–15.6V (Australia versions) 11.73–15.87V (Export/USA versions) |
|
| Current drain | Receive | Less than 3A (Max. audio), 1.0A (Stand-by) |
| Transmit | Less than 28A (Maximum output) | |
| Dimensions (W×H×D) (Projections not included) |
174×62×259 mm; 6.85×2.44×10.2 in (Controller attached type) |
|
| Weight (approx.) | 3.9kg; 8.6lb (Controller attached type) | |
Transmitter
IC-F8101 |
||
|---|---|---|
| Output power | Australia version | J3E: 100, 50, 10W PEP (typical) |
| Export/USA versions | J3E/A1A: 125, 50, 10W PEP (typical) A3E: 30, 12.5, 3W (typical) F1B/J2B: 75, 50, 10W PEP (typical) |
|
| Spurious emissions | 64dB below PEP typical (EXP/Australia versions) 64dB below PEP (USA versions) |
|
Receiver
IC-F8101 |
||
|---|---|---|
| Sensitivity (at 10dB S/N) |
J3E (Pre-amp. ON) |
0.5–1.5999MHz: 14dBμV 1.6–29.9999MHz: -14dBμV |
| A3E | 0.5–1.5999MHz: 22dBμV 1.6–29.9999MHz: 6dBμV |
|
| Squelch sensitivity | J3E (at 13.5MHz) |
Threshold: Less than +20dBμV Tight: Less than +90dBμV |
| A3E (at 1.000MHz) |
Threshold: Less than +30dBμV Tight: Less than +110dBμV |
|
| Spurious responses | More than 70dB | |
| Audio output power | 4.0W at 10% distortion with a 4Ω load | |
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and ingress protection standards.
Tested to IC-F8101, AD-119, CFU-F8100 and MB-126.
| Standard | MIL-810 G Method, Proc. |
|---|---|
| Low Pressure Storage |
500.5 I
|
| Low Pressure Operation |
500.5 II
|
| High Temperature Storage |
501.5 I
|
| High Temperature Operation |
501.5 II
|
| Low Temperature Storage |
502.5 I
|
| Low Temperature Operation |
502.5 II
|
| Temperature Shock |
503.5 I-C
|
| Solar Radiation |
505.5 I
|
| Rain Blowing |
506.5 I
|
| Rain Drip |
506.5 III
|
| Humidity |
507.5 II
|
| Salt fog |
509.5
|
| Dust Blowing |
510.5 I
|
| Vibration |
514.6 I
|
| Shock Functional |
516.6 I
|
| Shock Transit Drop |
516.6 IV
|
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Tested to IC-F8101, AD-119 and CFU-F8100.
| Ingress Protection Standards | |
|---|---|
| Dust & Water |
IP54 (Dust-protection and water resistant)
|
All stated specifications are subject to change without notice or obligation.




Reviews
There are no reviews yet.