Hytera PD408 Specifications
| General data | |
| Frequency range | VHF: 136 – 174 MHz UHF: 400 – 470 MHz |
| Supported operation modes |
DMR Tier II in reference to ETSI TS 102 361-1/2/3 |
| Channel capacity | 256 (128 analog + 128 digital) |
| Number of zones | 3 |
| Channel spacing | 12.5 / 25 kHz |
| Operating voltage | 7.4 V (nominal) |
| Battery | 1500 mAh (lithium-ion battery) |
| Battery service life(5-5-90 duty cycle) | analog / digital: approx. 12 / 16 hours (with 1500 mAh) approx. 16 / 22 hours (with 2000 mAh) |
| Frequency stability | ±0.5 ppm |
| Antenna impedance | 50 Ω |
| Dimensions (H×W×D) (with standard battery, without antenna) |
112 x 54 x 28 mm |
| Weight | approx. 270 g |
| Programmable keys | 2 |
| Transmitter | |
| Transmitting power | VHF: 1 / 5 W UHF: 1 / 4 W |
| Modulation | 11 K0F3E at 12.5 kHz 16 K0F3E at 25 kHz |
| 4FSK digital modulation | 12.5 kHz (data only): 7K60FXD 12.5 kHz (data and voice): 7K60FXW |
| Interfering signals and harmonics | -36 dBm < 1 GHz -30 dBm > 1 GHz |
| Modulation limiting | ±2.5 kHz at 12.5 kHz ±5.0 kHz at 25 kHz |
| Hum and noise | 40 dB at 12.5 kHz 45 dB at 25 kHz |
| Adjacent channel selectivity | 60 dB at 12.5 kHz 70 dB at 25 kHz |
| Audio sensitivity | +1 dB to -3 dB |
| Audio distortion | ≤ 3% |
| Digital vocoder type | AMBE +2™ |
| Receiver | |
| Sensitivity (analog) | 0.22 μV (12 dB SINAD) 0.22 μV (typical) (12 dB SINAD) 0.4 μV (20 dB SINAD) |
| Sensitivity (digital) | 0.22 μV / BER 5% |
| Adjacent channel selectivity TIA-603 ETSI |
60 dB at 12.5 kHz / 70 dB at 25 kHz 60 dB at 12.5 kHz / 70 dB at 25 kHz |
| Intermodulation TIA-603 ETSI |
70 dB at 12.5/25 kHz 70 dB at 12.5/25 kHz |
| Spurious response rejection TIA-603 ETSI |
70 dB at 12.5/25 kHz 70 dB at 12.5/25 kHz |
| Hum and noise | 40 dB at 12.5 kHz 45 dB at 25 kHz |
| Nominal audio power output | 0.5 W |
| Audio distortion | ≤ 3 % |
| Audio sensitivity | +1 dB to -3 dB |
| Conducted spurious emission | < -57 dBm |
| Ambient data | |
| Operating temperature range | -30 °C to +60 °C |
| Storage temperature range | -40 °C to +85 °C |
| ESD | IEC 61000-4-2 (level 4) ±8 kV (contact discharge) ±15 kV (air discharge) |
| Protection against dust and moisture | IP55 |
| Shock and vibration resistance | MIL-STD-810 C/D/E/F/G |
| Relative humidity | MIL-STD-810 C/D/E/F/G |
| All technical information was determined at the factory and in accordance with the corresponding standards. Subject to change on the basis of continuous development. | |
Be the first to review “Hytera PD408”
Related products
HANDY TALKY
HANDY TALKY
HANDY TALKY
HANDY TALKY
HANDY TALKY
HANDY TALKY
HANDY TALKY
HANDY TALKY
Reviews
There are no reviews yet.