Spesifikasi Alinco DJ-V47
| SPECIFICATIONS | |
| General | |
| Frequency range: | T: TX430 – 449.995MHz RX410 – 470MHz approx. E: TX/RX 430 – 439.995MHz |
| Modulation: | F3E (FM) |
| Frequency step: | 5,10, 12.5, 15, 20, 25, 30kHz step |
| Memory channel: | 200 channels + 1 call channel + 1 Repeater-Access parameter memory |
| Antenna impedance: | 50 ohm unbalanced |
| Frequency stability: | +/- 2.5ppm |
| Supply voltage: | DC 7.0 – 16.0V (EXT DC-IN) |
| Current consumption: (Typical value) |
TX at High power V/S17 1.4A, V27T 1.6A, V/S47 1.7A RX at 500mW AF out: 250mA Stand-by: V/S17 70mA, V27T 80mA, V/S47 80mA Battery-save ON: average 26mA |
| Temperature range: | Unit -10digC to 60digC (+14digF to +140digF) Battery packs: -10digC to +45digC (+14digF to +113digF) |
| Ground: | Negative |
| Dimensions: | 58(W)x110(H)x36.4(D)mm (2.28″(W)x4.33″(H)x1.43″(D)) with EBP-65N w/o projection |
| Weight: | Approx.280g (9.9oz) with EBP-65N & antenna |
| Transmitter | |
| Power output: (Approx.value) |
4.5W (with EBP-65N) 5W (with DC 13.8V) 0.8W (LOW output) |
| Modulation: | Variable reactance |
| Spurious emission: | -60dB or less |
| Max. deviation: | +/- 5KHz |
| Mic. impedance: | 2Kohm |
| Receiver | |
| System: | Double-conversion super heterodyne |
| Sensitivity: | -14.0dBu (0.2uV) or less |
| Intermediate frequency: | 1st IF 38.85MHz 2nd IF 450kHz |
| Selectivity: | -6dB: 12kHz or more -60dB: 26kHz or less |
| AF output: | 500mW (MAX) / 400mW (8ohm, 10% distortion) |
| Specifications subject to change without notice or obligation. Specifications apply to Amateur Radio bands only. Permits required for MARS use. Product intended for use by properly licensed operators. | |
Be the first to review “Alinco DJ-V47”
Related products
ALINCO
ALINCO
ALINCO
ALINCO
POWER SUPPLY
ALINCO
ALINCO
ALINCO
Reviews
There are no reviews yet.